Phone: (402) 434-9102
Email: [email protected]
Diaphragm switch with heavy duty .031” thick, black neoprene diaphragm, internally mounted with DPDT contact. Does not have hazardous location approvals.
Diaphragm switch with DPDT contacts
The BM65 DRHT and DFHT pressure switches alert to high or low levels in bins containing non-hazardous, free-flowing dry materials.
The DRHT is for internal mounting and the DFHT is for external mounting.
These switches do not have hazardous location approvals.
Tired of climbing bins to know if they are full? Want to stop overfilling bins?
Get affordable point level control for bins containing free-flowing dry solids with a density >20 lb./cu. ft.
How it works:
When material presses against the diaphragm, it activates a sensitive micro-switch with a DPDT contact that can be wired to start or stop a process or alert to high or low levels in bins using a horn or alarm.
Diaphragm switch features:
Overflow Prevention
High level alerts to avoid over-filling vessel
Material Outages
Low level alerts eliminate empty conditions
Plugged Chutes
Detect when chutes are clogged with material
Process Control
Switching relay to turn a process off or on
Conveyor Overload
Prevent jamming or damaging conveyors
| SKU | 730-0511 |
|---|---|
| Means of Measurement | Pressure Switch |
| Measurement Type | Point Level |
| Medium | Solids |
| Voltage | Up to 250 VAC |
| Outputs | Relay DPDT 10 Amp - 250 VAC max |
| Ambient Temperature | -40°F to +300°F (-40°C to +148°C) |
| Process Temperature | Up to +300°F (148°C) |
| Enclosure Material | Die cast aluminum |
Introductory video about diaphragm switches.
See where diaphragm switches are made.
Get to know all the BinMaster sensors.
Affordable BM-25 pressure switch for solids.
Wiring a BM-25 pressure switch to a light.
