Chat with us, powered by LiveChat
default

Need assistance faster?
Give us a call Monday - Friday
8:00am - 5:00pm CST

Phone: (402) 434-9102
Email: [email protected]

Get a quote

BM-TSM - Tilt switch for stationary mounting

SKU
730-0667

Tilt switch for high-level limit switch application for stationary mounting. Certified for Class II Groups E, F, and G.

Mercury-free: Fixed mount tilt switch

High level detection of powders and bulk solids in bins, silos, or over a conveyor belt.

Want to prevent overfilling bins? Stop overloading conveyors?

Use the BM-TSM mechanical tilt switch in bulk solid materials with a bulk density of at least 15 lb./cu. ft.

How tilt switch sensors work:

When material rises and tilts the switching mechanism 15 degrees, it activates a switch that sends an alert to a horn, light, or control panel.

What’s special about the BM-TSM:

  • Mercury-free design eliminates environmental or recycling hazards
  • C/US Class II, Division I Groups E, F, and G, and ATEX Zone 21 hazardous location approvals
  • Patented, non-powered pendulum design works mechanically and reliably
  • Custom shaft lengths from 1 foot up to 8 feet available with paddle or sphere
  • Simple, fixed mounting installation through a 1.25” NPT process connection
bm-tsm-tilt-switch-application
3D-overflow_1

Overflow Prevention
High level alerts to avoid over-filling vessel

material-outage

Material Outages
Low level alerts eliminate empty conditions

chute-clogged

Plugged Chutes
Detect when chutes are clogged with material

process-control

Process Control
Switching relay to turn a process off or on

conveyor-damage

Conveyor Overload
Prevent jamming or damaging conveyors

More Information
SKU730-0667
Means of MeasurementTilt Switch
Measurement TypePoint Level
MediumSolids
Voltage Up to 250 VAC
OutputsRelay SPDT
Ambient Temperature-40°F to +185°F (-40°C to +85°C)
Process TemperatureUp to +176°F (80°C)
ApprovalsCSA Class II, Groups E, F & G
Enclosure TypeNEMA 4X, NEMA 5, NEMA 12, IP 66
Enclosure MaterialDie cast aluminum
Mounting1.25" NPT
Conduit Entry0.75" NPT

Introductory video to the BM-TSM tilt switch.

See all the BinMaster sensors in this video.

Learn all about BinMaster.

BM-TSM Tilt Switch Brochures

BM-TSM Tilt Switch Manuals

BM-TSM Tilt Switch Spec Drawings

Copyright 2024, Garner Industries, Inc. All Rights Reserved