The WR-30-RP wireless signal repeater is used to retransmit wireless signals when connectivity is an issue. They are used to reroute signals around permanent obstacles or to transmit signals over distances exceeding one mile. Used with either the WR-30-TR or WR-90-TR, they are easy to install, requiring only power and a network ID. Any wireless bridge in range of the repeater with the same network ID will retransmit through it, increasing signal strength.
Display: 32-character dual-line alphanumeric dot matrix LCD display with backlight (4.68mm x 2.21mm characters)
Display Orientation: Display may be mounted at 180° from default orientation
Network ID: Field selectable: 0 – 99
Programming Methods: Four programming buttons (behind glass) or PC with WR Manager software
Recalibration: All inputs and outputs are calibrated at the factory. Recalibration is recommended at least every 12 months.
Process/ Digital I/O Display: Press the display button once to display the present analog input and output, press the display button again to display digital I/O states.
Password: A programmable password restricts modification of programmed settings.
Power: 12-28 VDC, 5 W max
Non-Volatile Memory: All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost.
Isolation: 500 V
Connections: Removable screw terminal blocks accept 16 to 30 AWG wire.
Enclosure: Cast aluminum with glass window, 0.30% max copper content, corrosion resistant powder coating, color: blue. NEMA 4X/IP68. Two ½" NPT threaded conduit openings. One ½" NPT stainless steel conduit plug with 10 mm hex key fitting installed.
Mounting: May be mounted directly to conduit. Two mounting holes for 1.5" pipe or wall mounting. See Mounting Dimensions on page 15 for mounting space requirements.
Tightening Torque: 2.5 lb-in (0.28 Nm)
Shipping Dimensions: 17" x 14" x 9" (43.2 cm x 35.6 cm x 22.9 cm) (L x W X H)
Shipping Weight: 5 lbs. (2.27 kg)
Warranty: 3 years parts & labor