Shopify Test STANDARD ROTARY LEVEL INDICATOR

Model: BMRX

The BRMX rotary paddle bin level indicator provides reliable point level detection and measurement of dry bulk solids in bins, tanks, silos, hoppers, and material conveyors. Mounted on the top or side of a bin, the BinMaster BMRX alerts operators when bins are full—normally through the use of a horn or light. The BMRX features “de-energized” operation of the motor which shuts the motor down when material is present, saving energy costs and prolonging the motor life. It is CE approved and is appropriate for use in hazardous conditions when explosion proof protection is needed–featuring Class I, Groups C and D, Class II E, F, and G listings.

Applications
Features
Specifications
Applications
  • Reliable point level detection for bulk solids including powders, pellets and granular materials
  • Used in bins, silos, chutes and conveyors
  • Material density from 2 lb./cu. ft. to over 100 lb./cu. ft.
  • Feed, seed, grain, food, sand, gravel, concrete, aggregates, plastics, chemicals, coal and many other materials
Features
  • Rugged construction and simple, dependable design
  • Triple thread screw-off cover
  • Switch selectable high/low fail-safe
  • De-energizing motor for extended operational life
  • Four-bearing shaft assembly reduces wear and increases reliability
  • Internal, bi-directional clutch
  • Various voltages available
  • DPDT relay output, 250 VAC, 10 Amp
  • Dual conduit entrance
  • Removable wiring terminals
  • Interchangeable with other rotaries
  • Powder-coated finish
  • Adjustable sensitivity
Specifications

Power Requirements: 24/115/230 VAC, 50/60 Hz; 24/ 12 VDC, 60/35 mA

Output Contacts: DPDT 10 Amp, 250 VAC

Ambient Operating Temp: -40°F to +185°F (-40°C to +85°C)

Process Temp: Up to +400°F (204°C)

Pressure: 1/2 micron, 30 PSI

Approvals & Certifications: CSA/US Class I, Groups C & D and Class II, Groups E, F & G
Ex II 2G c 1/2D c Ex d IIB T4 Gb Ex tb IIIC T130C Db (Ta = -20C to +85C)

Enclosure Type: NEMA 4X, 5, 7, 9 & 12

Enclosure: Die cast aluminum, USDA approved powder coat finish

Mounting: 1-1/4” NPT

Conduit Connections: 3/4” NPT

Shaft and components: Stainless steel

TEST