Point-to-Multipoint Wireless System

Model: WR-90-TR

The WR-90-TR is a point to-multipoint wireless bridge that eliminates the need for running wiring, saving time, and reducing installation costs. These units are used with the WR-90-BA base station which can be configured for a variety of inputs and outputs. The WR-90-TR accepts analog, discrete, and Modbus® inputs and wirelessly broadcasts them to the WR-90-BA base station. The WR-30-RP wireless repeater can be added if signals need to be routed around line-of-sight obstructions. This system configuration offers a highly flexible means of getting data from level sensors mounted on silos up to a mile away to a control room. 

Video
Applications
Features
Specifications
Literature
Video
Applications
  • Transmitting data from level sensors to a control room without running wiring
  • Complex operations where obstructions exist, and the signal must be routed using a wireless repeater
  • Operations where data needs to be centralized from one or more bins, tanks, or silos
  • Locations where bins, tanks, and silos are distanced up to 1 mile from a control room
Features
  • Point-to-multipoint signal wire replacement
  • Simple to configure using WR Manager programming software and onboard USB
  • Range of 1-mile line-of-sight, 500 ft. indoors
  • Analog, digital, and RS-485 inputs and outputs
  • Remote or attached, directional and omnidirectional antenna options
  • Units housed in IP68, NEMA 4X enclosure
  • Flanges for wall or pipe mounting
Specifications

Display: 32-character dual-line alphanumeric dot matrix LCD display with backlight (4.68mm x 2.21mm characters)
Display Orientation: Display may be mounted at 180° from default orientation.
Network ID: Field selectable: 0 - 99
Programming Methods: Four programming buttons (behind glass) or PC with WR Manager software
Recalibration: All inputs and outputs are calibrated at the factory. Recalibration is recommended at least every 12 months.
Process/Digital I/O Display: Press the display button once to display the present analog input and output. Press the display button again to display digital I/O states.
Password: A programmable password restricts modification of programmed settings.
Power: 12-28 VDC, 5 W max
Non-Volatile Memory: All programmed settings are stored in non-volatile memory for a minimum of ten years if power is lost.
Isolation: 500 V
Environmental

  • Operating temp. range: -40 to 65°C (display inoperable < -20 °C) 
  • Storage temp. range: -40 to 85°C 
  • Relative humidity: 0 to 90% non-condensing

Connections: Removable screw terminal blocks accept 16 to 30 AWG wire
Enclosure: Cast aluminum with glass window, 0.3% max copper content, corrosion resistant powder coating, color: blue. IP68. Two ½" NPT threaded conduit openings. One ½" NPT stainless steel conduit plug with 10 mm hex key fitting installed.
Mounting: May be mounted directly to conduit. Two mounting holes for 1.5" pipe or wall mounting. 
Signal Connector Tightening Torque: 2.2 lb-in (0.25 Nm)
Shipping Dimensions: 17" x 14" x 9" (43.2 cm x 35.6 cm x 22.9 cm) (L x W X H)
Shipping Weight: 5 lbs. (2.27 kg)
Warranty: 3 years parts & labor

Literature
Name
Document No.
925-0382
WR-90-1019-BLC