The SHT or Super High Temperature vibrating rod series is built specifically for higher process temperatures up to 482°F (250°C). It features a standard insulation tube that insulates the electronics from excessive heat. It has a standard insertion length of 7.24 inches for both top and side mount applications. It can be extended from 13 inches up to 13 feet using a rigid pipe extension for top mount applications. It has three sensitivity settings, does not require calibration, and can be used to detect extremely light, fluffy materials. SHT vibrating rods feature BinMaster’s unique stainless steel single-rod probe design that prevents bridging and buildup of material on the sensor.
Power Requirements: Wide range 20-250V AC/DC
Power Consumption: 3 VA
Relay: 1 potential-free change-over contact DPDT
Time Delay: 1 second from stop of vibration, 2 to 5 seconds for start of vibration
Ambient Temp: -4°F to +150°F (-40°C to +65°C)
Process Temp: To 482°F (250°C)
Pressure: 145 psi
Wiring Cable: 1/2”
Mounting: 1-1/2” NPT
Enclosure: Die cast aluminum, NEMA 4, 5 & 12
Probe: 304 stainless steel, (SHT-120 7.37” insertion length, SHT-140 14” to 13’ insertion length)
Material Density: From 1.25 lb./cu. ft.