80 GHz Non-Contact Radar for Solids

Model: NCR-80

The BinMaster NCR-80 is a non-contact radar level sensor designed for superior performance in extremely dusty powders and bulk solids. Its powerful 80 GHz frequency focused in a narrow 4° beam angle with a measuring range up to 393 feet and accuracy within 0.2 inches means it excels in tall and narrow vessels. The NCR-80 is offered with a 10°swiveling, stainless steel flange for precise targeting; a lightweight plastic antenna with an 8° swiveling flange or a mounting strap for adjustable targeting; or a 1-1/2" NPT mounting option for use in an existing process connection. The NCR-80 is resistant to interference, while its advanced filters ensure rapid signal processing and an update rate of less than one second.

  • Cement, grain, power, wood chips, pellets, sand, aggregates, or plastics
  • Very tall, narrow silos for single point level measurement
  • Vessels with excessive noise, dust, or high temperatures
  • Vessels where precise aiming is needed to avoid flow stream, internal structure, or sidewall buildup
  • Low dielectric materials or materials with limited reflectivity
  • Mounted over piled material in flat storage warehouses
  • Over conveyors belts to prevent overloading or detect when belts are running empty
  • Measure levels within equipment, such as crushers or ESP hoppers
  • Level measurement of piles or pits
  • Powerful 80 GHZ non-contact radar
  • Measuring distance up to 393 feet
  • 4° beam angle for precise targeting
  • Reliable accuracy within 0.2 inches
  • High temperatures up to 392°F
  • Hazardous location approvals
  • FDA approval for food or pharmaceutical use
  • Chemical-resistant for long-lasting performance
  • BinDisc option simplifies setup and configuration


Frequency: 79 GHz
Measuring Range: 394 feet (120 m)
Accuracy: ± .2” (5mm)
Power Requirements: 

  • Low Voltage Version: 9.6 to 48 V DC, 20 to 42 V AC, 50/60 Hz
  • Regular Voltage Version: 90 to 253 V AC, 50/60 Hz

Enclosure Rating: IP66/IP68 (0.2 bar), IP66/IP67, IP66/IP68 (1 bar)
Output: Profibus PA, Foundation Fieldbus, Two-wire 4 - 20 mA/HART®, Modbus, Four-wire 4 - 20 mA/HART® 


Stainless Steel (Metal) Flange

Antenna Type: metal jacketed lens antenna
Process Temperature: -40°F to 392°F (-40° to 200°C)
Process Pressure: -1 to +3 bar (-100 to +300 kPa)
Mounting: DN 80 flange, DN 100 flange with swivel holder
Housing Material: Aluminum

Plastic Antenna

Antenna Type: 3.15" (80mm) plastic horn antenna
Process Temperature: -40°F to 176°F (-40° to 80°C)
Process Pressure: -1 to +2 bar (-100 to +200 kPa)
Mounting: Mounting strap, DN 100 adapter flange, DN 80 compression flange
Housing Material: Plastic

1-1/2" NPT

Antenna Type: metal jacketed lens antenna
Process Temperature: -40°F to 392°F (-40° to 200°C)
Process Pressure: -1 to +20 bar (-100 to +2000 kPa)
Mounting: 1-1/2" NPT Process connection
Housing Material: Aluminum