Chat with us, powered by LiveChat

PRO AUTOCAL 115 power pac

PRO AUTOCAL 115 power pac with 115 VAC, PRO-Shield protection with continuous LED status light, auto calibration and function test, hazardous location approved, C/US listed for Class II, Groups E, F, G

Need assistance faster?
Give us a call Monday - Friday
8:00am - 5:00pm CST

Phone: (402) 434-9102
Email: [email protected]

Get a quote

The person responsible for your area will be in touch shortly

PRO AUTOCAL: Calibration Without Opening the Unit

This capacitance sensor allows for simple, automatic calibration using a special magnet. No need to remove the unit cover!

Want a capacitance probe that sets up fast? Temperature-stable calibration and external testing can be performed in just minutes.

Get unsurpassed 0.5 pF sensitivity and fail-safe performance with the PRO AUTOCAL. Plus, an adjustable time delay of up to 10 seconds allows for settling of material--virtually eliminating false alarms.

What else you get with PRO AUTOCAL:

  • PRO-Shield compensates for material buildup to guard against false readings
  • Operates below RF range, always free from RF interference
  • Switch selectable high/low fail-safe safeguards from failures
  • Delrin or Teflon sleeved, bare, food grade, flush mount, or flexible probes
  • Visual LED indicates sensor status of uncovered, covered, or power failure

How and where to use PRO AUTOCAL:

  • As a point level detection and process control for solid, liquids, or slurries 
  • Aggressive materials such as coal or fly ash; power, mining, and foundries
  • Processing of plastics, chemicals, foodstuffs, or pharmaceuticals
  • Milling operations processing feed, grain, wood, or paper
pro-autocal-capacitance-probe
More Information
SKUPA1.
Means of MeasurementCapacitance
Measurement TypePoint Level
MediumSolids
Voltage 115 VAC
OutputsRelay DPDT 10 Amp - 250 VAC max
Ambient Temperature-40°F to +185°F (-40°C to +85°C)
Process TemperatureUp to +176°F (80°C)
ApprovalsCSA Class II, Groups E, F & G
Enclosure TypeNEMA 4X, NEMA 5, NEMA 9, NEMA 12
Enclosure MaterialDie cast aluminum
Mounting1.25" NPT
Conduit Entry0.75" NPT

Mounting Plates

Accessories

Introductory video about capacitance probes.

How to calibrate and wire a capacitance probe.

How to wire a capacitance probe to a light.

Mini capacitance probes for point level detection.

Pro Auto-Cal Brochures

Pro Auto-Cal Manuals

Copyright 2024, Garner Industries, Inc. All Rights Reserved