Chat with us, powered by LiveChat
default

Need assistance faster?
Give us a call Monday - Friday
8:00am - 5:00pm CST

Phone: (402) 434-9102
Email: [email protected]

Get a quote

18” Shaft with 316 SS sphere for BM-T tilt switch

SKU
730-0110

The 18” Shaft with 316 SS sphere is used with the BM-T tilt switch in applications where the material can build up around the standard paddle without actuating the switch. This is typically in fine powders, lighter materials, and liquids. 

Tilt switch: Simple, high-level detection

Prevent overfilled bins, overloaded conveyors, and plugged chutes.

Need affordable high-level alerts? Want to avoid clogged chutes or conveyors?

Use the BM-T in solid materials with a density of 15 lb./cu. ft. or greater.

How it works:

A mechanical switch activates an alert when the device is tilted to 15 degrees.

Where it’s installed:

  • On the roof of bins, silos, and storage
  • Above material as a load sensor on conveyor belts
  • Suspended over open pits during processing
  • Over top of piles of grains or aggregates
  • In chutes to detect and prevent plugs or clogs
  • At the end of radial stacker conveyors to index the conveyor and shift the pile
bm-t-tilt-switch-application
3D-overflow_1

Overflow Prevention
High level alerts to avoid over-filling vessel

material-outage

Material Outages
Low level alerts eliminate empty conditions

chute-clogged

Plugged Chutes
Detect when chutes are clogged with material

process-control

Process Control
Switching relay to turn a process off or on

conveyor-damage

Conveyor Overload
Prevent jamming or damaging conveyors

More Information
SKU730-0110

Introductory video to the BM-TSM tilt switch.

See all the BinMaster sensors in this video.

Learn all about BinMaster.

BM-T Tilt Switch Brochures

BM-T Tilt Switch Manuals

BM-T Tilt Switch Spec Drawings

Copyright 2024, Garner Industries, Inc. All Rights Reserved