Chat with us, powered by LiveChat
default

Need assistance faster?
Give us a call Monday - Friday
8:00am - 5:00pm CST

Phone: (402) 434-9102
Email: [email protected]

Get a quote

PROCAP IX power pac

PROCAP IX power pac with universal power supply 24 to 240 VAC/VDC with triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, hazardous location approved, C/US listed for Class I, Groups C & D and Class II, Groups E, F, G

PROCAP capacitance probe: Your most versatile point level sensor

Get a custom capacitance probe built to your specifications right here in the USA. BinMaster assemblers will build your probes in-house to suit a wide variety of powders, solids, liquids, and slurries.

Choose your power requirements:

PROCAP I: Universal power supply 24 to 240 VAC/VDC

PROCAP II: Selectable 115/230 VAC

Select a model to meet your environmental conditions:

Standard: PROCAP I & II are listed for Class II, Groups E, F & G

Hazloc:  PROCAP IX & IIX have CSA Class I, Groups C & D and Class II, Groups E, F, & G hazardous location ratings

Sanitary: PROCAP I-3A & II-3A meet 3-A material and design standards for sanitary food and dairy processing

Get the right probe in the right length for your vessel and material:

  • Bare, Delrin, or Teflon sleeved, food grade, shielded or unshielded
  • Flush mount for bin walls, chutes, and conveyors
  • Custom length solid and flexible extensions

Plus, you get all this with every BinMaster PROCAP:

  • PRO-shield buildup prevention
  • Simple quick set, temperature stable calibration
  • Switch-selectable, high/low fail-safe
  • Adjustable time delays to 30 seconds to prevent false signals
  • Visual LED status light indicates covered, uncovered, or failed
  • Protection from RF interference
pro-remote-capacitance-probe
3D-overflow_1

Overflow Prevention
High level alerts to avoid over-filling vessel

material-outage

Material Outages
Low level alerts eliminate empty conditions

chute-clogged

Plugged Chutes
Detect when chutes are clogged with material

process-control

Process Control
Switching relay to turn a process off or on

conveyor-damage

Conveyor Overload
Prevent jamming or damaging conveyors

More Information
SKUPC1X.
Means of MeasurementCapacitance
Measurement TypePoint Level
MediumSolids
Voltage 24 to 240 VAC/VDC Universal
OutputsRelay DPDT 10 Amp - 250 VAC max
Ambient Temperature-40°F to +185°F (-40°C to +85°C)
Process TemperatureUp to +176°F (80°C)
ApprovalsCSA/US Class I, Groups C & D and Class II, Groups E, F & G, CSA Class II, Groups E, F & G
Enclosure TypeNEMA 4X, NEMA 5, NEMA 7, NEMA 9, NEMA 12
Enclosure MaterialDie cast aluminum
Mounting1.25" NPT
Conduit Entry0.75" NPT

Mount Plates

Accessories

Introductory video about capacitance probes.

How to calibrate and wire a capacitance probe.

How to wire a capacitance probe to a light.

Mini capacitance probes for point level detection.

Procap Brochures

Procap Manuals

Procap Spec Drawings

Copyright 2024, Garner Industries, Inc. All Rights Reserved