Chat with us, powered by LiveChat

PROCAP I-3A power pac


PROCAP I-3A power pac with universal power supply 24 to 240 VAC/VDC with LED status light, triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, has a 3-A certificate, is hazardous location approved, and C/US listed for Class II, Groups E, F, G.

Need assistance faster?
Give us a call Monday - Friday
8:00am - 5:00pm CST

Phone: (402) 434-9102
Email: [email protected]

Get a quote

The person responsible for your area will be in touch shortly

PROCAP capacitance probe: Your most versatile point level sensor

Get a custom capacitance probe built to your specifications right here in the USA. BinMaster assemblers will build your probes in-house to suit a wide variety of powders, solids, liquids, and slurries.

Choose your power requirements:

PROCAP I: Universal power supply 24 to 240 VAC/VDC

PROCAP II: Selectable 115/230 VAC

Select a model to meet your environmental conditions:

Standard: PROCAP I is listed for Class II, Groups E, F & G

Hazloc:  PROCAP IX has CSA Class I, Groups C & D and Class II, Groups E, F, & G hazardous location ratings

Sanitary: PROCAP I-3A & II-3A meet 3-A material and design standards for sanitary food and dairy processing

Get the right probe in the right length for your vessel and material:

  • Bare, Delrin, or Teflon sleeved, food grade, shielded or unshielded
  • Flush mount for bin walls, chutes, and conveyors
  • Custom length solid and flexible extensions

Plus, you get all this with every BinMaster PROCAP:

  • PRO-shield buildup prevention
  • Simple quick set, temperature stable calibration
  • Switch-selectable, high/low fail-safe
  • Adjustable time delays to 30 seconds to prevent false signals
  • Visual LED status light indicates covered, uncovered, or failed
  • Protection from RF interference

Overflow Prevention
High level alerts to avoid over-filling vessel


Material Outages
Low level alerts eliminate empty conditions


Plugged Chutes
Detect when chutes are clogged with material


Process Control
Switching relay to turn a process off or on


Conveyor Overload
Prevent jamming or damaging conveyors

More Information
Means of MeasurementCapacitance
Measurement TypePoint Level
Voltage 24 to 240 VAC/VDC Universal
OutputsRelay DPDT 10 Amp - 250 VAC max
Ambient Temperature-40°F to +185°F (-40°C to +85°C)
Process TemperatureUp to +176°F (80°C)
ApprovalsCSA Class II, Groups E, F & G
Enclosure TypeNEMA 4X, NEMA 5, NEMA 9, NEMA 12
Enclosure MaterialDie cast aluminum
Mounting1.25" NPT
Conduit Entry0.75" NPT

Mount Plates


Introductory video about capacitance probes.

How to calibrate and wire a capacitance probe.

How to wire a capacitance probe to a light.

Mini capacitance probes for point level detection.

Procap Brochures

Procap Manuals

Procap Spec Drawings

Copyright 2024, Garner Industries, Inc. All Rights Reserved