Chat with us, powered by LiveChat

LTR-100 long range (LoRa) transceiver


LTR-100 long range (LoRa) transceiver connects sensors with a 2 or 4-wire 4-20mA output to a BinCloud® gateway at distances up to one mile line-of-sight. Affordable option for configuring a network to access BinView® or Binventory® data from the Cloud.

Need assistance faster?
Give us a call Monday - Friday
8:00am - 5:00pm CST

Phone: (402) 434-9102
Email: [email protected]

Get a quote

The person responsible for your area will be in touch shortly

The LoRa Transceiver—LTR-100—is a wireless device used to connect sensors with a 2 or 4 wire 4-20mA output to a BinCloud® Gateway using long range radio technology. The LTR-100 is a low-cost option for connecting analog sensors to a gateway used to access BinView® or Binventory®data from the cloud. It transmits 4-20 mA sensor data to the BinCloud® gateway over distances up to one-mile line-of-sight, eliminating the need to run wiring to the gateway.

The LTR-100 is compatible with any BinMaster Modbus-capable sensor or any sensor with a 2 or 4-wire 4-20 m A output including other brands of sensors. It can also serve as a loop power supply to BinMaster CNCR sensors or any sensor that requires 24 VDC less than 0.42A, and accept one Modbus sensor network input. This affordable device decreases the complexity of inventory system installation and eliminates the need to run long spans of wire, further reducing overall system costs.

  • Connects BinMaster Modbus-capable sensors or any sensor with a 4-wire 4-20 mA output to a BinCloud® gateway
  • Loop power supply for CNCR or other sensors that require 24VDC less than 0.42A
  •  LoRa radio uplink compatible with US or EU radio frequency bands
  • Compatible with BinMaster and other brands of sensor with 4-20 mA output
  • Eliminates need for running long spans of wire to BinCloud® gateway
  • LoRa transceiver sends data at distances up to one-mile line-of-sight
  • Affordable, easy to install, and connects sensors to network
  • Can accept one Modbus sensor network input

AC Line Voltage: 80 to 305 VAC 50/60 Hz

AC Line Current: 250 mA maximum

24 VDC Input Voltage: 21.6 to 26.4 VDC

24 VDC Input Current: 320 mA maximum

24 VDC Output Current: 110 mA maximum each port

Storage Temperature: -40° to 185°F (-40° to 85°C)

Operating Temperature: -40° to 167°F (-40° to 75°C)
(no load on 24 VDC outputs)

Operating Temperature: -40° to 140°F (-40° to 60 °C)
(max load on 24 VDC outputs)

Dimensions (not including the antenna or antenna mount): 6.75 x 4.13 x 2.44 in (171 x 105 x 62 mm)

Enclosure: Light gray polycarbonate

Ingress Protection Rating: NEMA Type 4X

LTR-100 Brochures

LTR-100 Manuals

Copyright 2024, Garner Industries, Inc. All Rights Reserved