Good Neighbor Expands
KANSAS COOP HANDLES HIGHER VOLUMES WITH LOWER COMMUNITY IMPACT
Farmway Coop Inc.
Beloit, KS • 785-738-2241
Storage capacity: 26 million bushels at 16 locations
Annual volume: 30 million bushels
Annual revenues: $600 million
Number of members: 6,325
Number of employees: 130
Crops handled: Hard red winter wheat, sorghum, corn, soybeans, sunflowers
Services: Grain handling and merchandising, agronomy, distribution center
Key personnel at Glen Elder:
- Rod Barker, location manager
- Joe Senger, superintendent
- Janelle Beatz, office manager
Bearing sensors...... CMC Industrial Electronics
Bin sweeps.............Springland Mfg.
Bucket elevators........... Intersystems
Catwalks..... LeMar Industries Corp.
Concrete tanks...............McPherson Concrete Storage Systems Inc.
Contractor................. HABCO Inc.
Control system.......... Kasa Controls
Conveyors (belt)....Hi Roller Conveyors
Conveyors (drag)......... Intersystems
Distributors ........Hayes & Stolz Ind. Mfg. Co. Inc.
Dust collection system... Industrial Air, AIRLA NCO
Elevator buckets.......Maxi-Lift Inc.
Grain temperature system..........CMC Industrial Electronics, TempuTech Inc.
Level indicators...... BinMaster Level Controls
Magnets.......Bunting Magnetics Co.
Millwright................. HABCO Inc.
Motion sensors...... CMC Industrial Electronics
Tower support system...........LeMar Industries Corp.
When Farmway Coop Inc. set out late in 2010 to expand storage and handling capacity at its elevator in Glen Elder, KS (785-545-3321), the reasons would sound familiar to most country elevator managers. With 1.3 million bushels of new upright concrete storage and twin receiving pits and legs with 50,000 bph capacity, the facility is positioned to load corn, soybean, and wheat trains back to back. The Glen Elder location is on track to load 50 to 60 trains a year, up from about 32 a year earlier on the Kyle Railroad, a short-line with connections to the Union Pacific at Salina, KS.
But there’s more to it than that, says Location Manager Rod Barker, who came to Farmway five years ago from Mid-Kansas Co-op. One new feature of the expanded facility, he says, is a new automation system from Kasa Controls that has improved both safety and equipment maintenance. “We used to run things until they quit working,” Barker says. “Now, we have a system that shuts equipment down before it fails. It will tell you if a belt is not tracking right or rubbing up on a rub block. It’s all Internet-based, and technically, you could run this elevator from a smartphone in Japan, if you needed to.” Other innovations are aimed at the environment in Glen Elder. For example, the coop installed a custom-designed shed-type housing for the aeration fans on the new tanks to reduce the noise from the fans’ operation. “We have homes only 100 feet from the elevator,” says Barker.
Additional plans for 2013 call for the installation of an oil-based dust suppression system and an upgrade to the elevator’s hazard monitoring system. “At first, it was a tough go with the city to get the project approved,” Barker explains. “But with some give and take on both sides, we’re getting along a lot better, and we have a lot of support from the city.”
For the $10 million project, Farmway hired HABCO Inc., Salina, KS (785- 823-0440), as general contractor and millwright and McPherson Concrete Storage Systems, McPherson, KS (800- 999-8151), to build two jumpform concrete tanks. Also heavily involved in the upgrade was Watson Electric Inc., Salina (785- 827-2924), which served as electrical contractor and installed the KASA control system. Work proceeded in two phases, with the first phase beginning in December 2010 and the second phase completed in June 2012, in time for the Kansas wheat harvest.
The first (and smaller) phase of construction in 2011 involved the upgrade of equipment serving an existing slipform concrete house. Specifically, HABCO refurbished an existing Gerber Roto-Flo distributor and added a 40,000-bph Intersystems gravity screener on the rooftop, enabling the operator to clean grain either on receiving or prior to the existing bulk weigh loadout system. Watson Electric also added the KASA control system during this phase.
Second Phase – Storage
In 2012, McPherson built a pair of jumpform concrete tanks rated at 700,000 and 650,000 bushels, respectively. Barker notes that one of the two tanks has an above-ground tunnel for the reclaim conveyor, which took up space that otherwise would go to grain storage. Both tanks stand 84 feet in diameter and 144 feet high. These tanks are equipped with 16-inch Springland sweep augers, 16-cable TempuTech grain temperature monitoring systems, and BinMaster level monitors.
Second Phase – Handling
Adjacent to the two new tanks, crews constructed a pair of covered mechanical receiving pits holding 1,000 bushels each. A pair of below-ground 25,000-bph Intersystems drag conveyors carry grain from the pits to a pair of Intersystems 25,000-bph legs. These legs are outfitted with a single row of Maxi-Lift CC-MAX 20x8 buckets mounted on 24-inch belts. Either pit can reach either leg. The legs raise grain up to a six-hole Hayes & Stolz swing-type double distributor. Grain then descends via gravity spouts to a set of 25,000-bph Intersystems drag conveyors running out to the two new tanks. The tanks empty onto 50,000-bph Hi Roller belts in below-ground tunnels. These deliver grain to an existing 50,000-bph shipping leg for rail loading. “Everything has worked very well so far,” Barker says.