BMRX-200 - Rotary power pac - 24 VDC - CSA Hazloc Approvals

Voltage: 24 VDC
Certifications: CSA C/US (DIP) Class II, Groups E, F & G Hazardous Locations
Process Connection: 1-1/4” NPT Aluminum process connection fitting
Comparable Previous Model: 730-0661

The BinMaster BMRX-200 rotary level indicator is used in solids and powders to prevent overfills, dry runs, or process shutdowns. It has an onboard PCB and DPDT relays that allow users to set up two switching outputs, such as one to a covered and the other to an uncovered condition.

The BMRX-200 relay outputs are designed to be “fail safe” in case of power failure. If power fails to the rotary, the relays will default to the output deemed “safe” for a high-level or low-level indicator application.

The BMRX-200 rotary level indicator power pac features a screw-off cover, 3/4" NPT dual conduit entries, and an FDA-recognized powder coat finish.

Once installed, the enclosure can be rotated. This unique feature makes it easy to ensure conduit entries are always pointed toward the ground, mitigating the risk of moisture damaging internal components. New wire guides also ensure wires don’t get stuck as you push them through conduit entries.

By alerting to full and empty vessel conditions, it prevents waste and saves time when handling bulk materials stored in bins and silos. It’s designed for materials with a bulk density of 2 lb. to over 100 lb./cu. ft. for use in ordinary storage and processing conditions.

Mounting plates, couplers, and paddles are sold separately.

There are other configurations of BMRX rotaries available with a variety of 1-1/4" and 1-1/2" aluminum and stainless-steel process connections. BinMaster offers rotaries for use in non-hazardous, ordinary locations and with CSA C/US and IECEx/ATEX certifications. Plus, we offer custom hanging, extended, bearing end, and rotaries with heat tubes. Email [email protected] or call 800.278.2421 to discuss your needs.