Chat with us, powered by LiveChat

BMRX-200 Rotary power pac - 230 VAC - CSA Hazloc Approvals

$420.00
In stock
SKU
BMRX-200.D2XAA

Voltage: 230 VAC
Certifications: CSA C/US (DIP) Class II, Groups E, F & G Hazardous Locations
Process Connection: 1-1/4” NPT Aluminum process connection fitting
Comparable Previous Model: 730-0503

The BinMaster BMRX-200 rotary level indicator is used in solids and powders to prevent overfills, dry runs, or process shutdowns. It has an onboard PCB and DPDT relays that allow users to set up two switching outputs, such as one to a covered and the other to an uncovered condition.

The BMRX-200 relay outputs are designed to be “fail safe” in case of power failure. If power fails to the rotary, the relays will default to the output deemed “safe” for a high-level or low-level indicator application.

The BMRX-200 rotary level indicator power pac features a screw-off cover, 3/4" NPT dual conduit entries, and an FDA-recognized powder coat finish.

Once installed, the enclosure can be rotated. This unique feature makes it easy to ensure conduit entries are always pointed toward the ground, mitigating the risk of moisture damaging internal components. New wire guides also ensure wires don’t get stuck as you push them through conduit entries.

By alerting to full and empty vessel conditions, it prevents waste and saves time when handling bulk materials stored in bins and silos. It’s designed for materials with a bulk density of 2 lb. to over 100 lb./cu. ft. for use in ordinary storage and processing conditions.

Mounting plates, couplers, and paddles are sold separately.

There are other configurations of BMRX rotaries available with a variety of 1-1/4" and 1-1/2" aluminum and stainless-steel process connections. BinMaster offers rotaries for use in non-hazardous, ordinary locations and with CSA C/US and IECEx/ATEX certifications. Plus, we offer custom hanging, extended, bearing end, and rotaries with heat tubes. Email [email protected] or call 800.278.2421 to discuss your needs.

Need assistance faster?
Give us a call Monday - Friday
8:00am - 5:00pm CST

Phone: (402) 434-9102
Email: [email protected]

Get a quote

The person responsible for your area will be in touch shortly

Rotary Level Indicator with PCB and DPDT switch

The BMRX-200 alerts to vessel levels in solid materials with a bulk density of 2 lb. to over 100 lb./cu. ft. Additional features including a PCB, a DPDT relay, and fail-safe high and low differentiate it from the BMRX-100.

On-board PCB

The BMRX-200 has a PCB versus a simple switch like the BMRX-100. This PCB allows the BMRX to add a DPDT relay and a fail-safe high and fail-safe low feature to the performance of the rotary.

Fail-safe relay outputs

The BMRX-200 relay outputs are designed to be “fail safe” in case of power failure. If power fails to the rotary, the relays will default to the output deemed “safe” for a high-level or low-level indicator application. Fail-safe high and fail-safe low switching output offered a bit more flexibility over the BMRX-100.

Two-switching outputs

A DPDT relay in the BMRX-200 allows the user to set up two switching outputs, instead of one like the SPDT switch on the BMRX-100. This switch can control two separate circuits and can be set to one of two locations for each circuit.

For example, one switching output in the BMRX-200 can be set for a covered condition and the other can be set for an uncovered condition.

New enclosure feature

The enclosure rotates to point conduit entries down upon installation. Protect internal components from moisture and extend service life.

Time for a new rotary? Call 402-434-9102 or order online now!

BMRX-200_IMG_4887-1000x
3D-overflow_1

Overflow Prevention
High level alerts to avoid over-filling vessel

material-outage

Material Outages
Low level alerts eliminate empty conditions

chute-clogged

Plugged Chutes
Detect when chutes are clogged with material

process-control

Process Control
Switching relay to turn a process off or on

conveyor-damage

Conveyor Overload
Prevent jamming or damaging conveyors

More Information
SKUBMRX-200.D2XAA
Means of MeasurementRotary Paddle
Measurement TypePoint Level
MediumSolids
Voltage 230 VAC
OutputsRelay DPDT 10 Amp - 250 VAC max
Ambient Temperature-40°F to +131°F (-40° to +55°C)
Process TemperatureUp to +400°F (204°C)
ApprovalsCSA Class II, Groups E, F & G
Enclosure TypeNEMA 4X, IP 66
Enclosure MaterialDie cast aluminum
Mounting1.25" NPT
Conduit Entry0.75" NPT

Mount Plates

Paddles

BinMasters BMRX family of rotaries explained

Learn how extensions and custom fittings come into play.

Learn all about BinMaster rotary level switches.

How to wire a light to a BinMaster rotary level indicator.

How to change a motor on a BMRX rotary paddle switch.

BMRX-200 Brochures

BMRX-200 Manuals

BMRX-200 Spec Drawings

Copyright 2024, Garner Industries, Inc. All Rights Reserved