|
|
 |
| Products:
Dust Detection: Dust Detect 2000 |
 |
|
|
|
The
Dust Detect 2000 is designed to monitor the flow
of particulate emissions through a filter in a
dust collection system. It helps you prevent the
loss of valuable product, dramatically improve
the safety of your plant, and virtually eliminate
emissions related shutdowns. This model differs
from the Dust Detect 1000 in that it offers the
convenience of a remote control unit for the sensing
probe. With its many features, the Dust Detect
2000 is the most accurate and dependable dust
monitoring system available.
Features
-
Continuous monitoring of dust concentration
-
Triboelectric probe gives most accurate readings
available
-
Emissions readings are averaged, not smoothed,
to eliminate false readings
-
Pre-warning indicator alerts you to potentially
hazardous situations
-
Tri-color LED readout displays unit status at
all times
-
Control unit may be located up to 500 feet from
sensing probe
-
Can be used with several types of filtration
systems
|
|
Specifications:
Sensor Probe
|
| Enclosure: |
Die
Cast Aluminum, FDA Approved |
| Power
Requirement: |
Low
Voltage, Supplied By DDC Control Console |
| Operating
Temperature: |
-40°
to +160°F (-40° to +71°C) |
| Stack
Temperature: |
+250°F
(+107°C) |
|
Process Connection: |
1
¼" NPT |
| Conduit
Connection: |
¾"
NPT |
| Cable
Specification: |
8
Conductor Shielded Cable, Maximum Length 500 Feet |
| Sensor
Red: |
Stainless
Steel
3, 6, & 12" Standard, 1.5 - 36" Custom Lengths Available |
| Approvals
Pending: |
NEMA
4X, Class II, Groups E, F & G |
Specifications:
Control Console
|
| Enclosure: |
8"
x 6" x 4" Fiberglass, NEMA 4X, 12 & 13 |
| Power
Requirement: |
Selectable,
115/230 VAC, 60/50 Hz |
| Operating
Temperature: |
-25°
to +160°F (-32° to +71°C) |
| Output: |
Two
SPDT 5A Relays (pre-warning and alarm)
Tri-color LED:
Green - Normal
Solid Orange - Pre-warning (4x reference)
Red - Alarm Condition (16x reference)
Flashing Orange - Calibrating
Flashing Red - Reference Not Set |
|
Fail-Safe: |
Optional |
| Alarm
Delay: |
Activated
After Completion of Average Calculation
(up to a 2 minute delay) |
| Sensitivity
Adjustment: |
"Quick
Set" button |
| Approvals: |
Ordinary
Locations, Industrial Control Equipment |
Contact Us
|
|
|
|
 |
|
| |
|
