System designed for a simple interface between the SBR II Remote Sensor and the PLC or DCS system. The PLC/DCS can initiate a measurement by providing a dry contact closure to the BinMaster Remote Start Unit (RSU). The PLC/DCS can then retrieve the measurement from analog 4-20 mA current loop output from the RSU. The RSU also provides a remote display and can be used to initiate a manual or timed measurement.

RSU Features

• Provides an external start input, 4 to 20 mA current loop output, and a remote display of the measurements
  
  
• Built-in timer allows you to set repetitive time intervals to activate measurements
  
  
• Simple to wire and operate
  
  
• Available in both NEMA I and NEMA 4X models
  
  
• Easy to read LCD display
  
  
• Last measurement is stored in a nonvolatile memory; therefore, the information will not be lost if power is removed
  
  
• The measurement on the screen is displayed in distance to product, height of product, and percentage of product in the storage vessel in English or metric units
  
  
• Wireless communication options available