Electronic
stability that will firmly hold calibration
Temperature
stable from -40°F to +180°F
Incorporate
a unique discharge time constant detector circuit
which allows sensing capacitance changes less than
1 picofarad
PRO series
probes operate at approximately 6 kHz and do not
generate radio frequencies -- we are true capacitance
Four level
of static safeguards; (1) Static Drain (2) Gas discharge
tube that does not allow voltage to rise above a certain
level (3) By-Pass Capacitance on input passes a fast
impulse to ground (4) Current Limiting series resistance
on probe
Fail Safe
fault detection monitoring
The "Quick
Set" calibration feature allow for simple setup
and calibration of the unit to achieve low, medium,
or high sensitivity settings. Units are calibrated
with the probes uncovered.
Multiple
power capabilities
New stronger
5/8" stainless steel probe
3/4"
NPT and 1 1/4" NPT mounts standard on all 5/8"probe
units.
PRO series
(excluding Pro III) feature the PRO-Shield to guard
against false indications from material side wall
buildup on the sensing probe
Standard
Delrin insulated sleeve probes that are highly abrasion
resistant and inexpensive to replace should they wear
out. Allows the probe to function in both dry solid
or liquid applications. These sleeves also give us
the coated probe necessary for explosion proof and
food grade applications.
Multiple
power pack, probe and fitting options
All components
designed for industrial application
