|
 |
|
Pro II X
Shown with Teflon Sleeve Probe
|
The PRO II X is our most versatile all-purpose probe.
It works reliably in bulk solids, powders, slurries,
or liquids. It has a rugged 5/8" dia. 316 SS probe
featuring "pro-shield" protecting against
false readings because of coating and buildup on probe.
Features
-
Maintains calibration in varying temperatures, eliminating
recalibration
- "Quick
Set" calibration provides simple selection of detection
sensitivity
-
PRO-Shield technology ignores material buildup, guards
against false indications
-
Operates below RF range to eliminate RF interference
-
Fail-safe protection, switch selectable high/low
- Adjustable
time delay up to 10 seconds
Specifications: PRO II X
|
| Power Requirements: |
115/230 VAC, 50/60 Hz ± 15%, 5VA |
| Output Relay: |
DPDT 10 Amp at 250 VAC |
Ambient Temperature
Electronics:
Sensor: |
-40° to +185°F (-40° to +85°C)
+250°F (+121°C) Delrin / +500°F (+260°C) Teflon |
| Pressure: |
500 PSI, 3/4" Mount |
| Sensitivity Setting: |
Adjustable Sensitivity to < 1 Picofarad |
| Calibration: |
"Quick Set" Course/Fine
Single Turn Potentiometers |
| Fail-Safe: |
Switch Selectable High/Low |
| Time Delay: |
Adjustable .25 to 10 seconds |
| Enclosure: |
Cast Aluminum, Bolt-on Cover
USDA Approved Powder Coated Finish |
| Conduit Entry: |
¾" NPT |
| Mounting: |
1 1/4" NPT or 3/4" NPT SS |
| Pro Shield: |
Compensates For Material Build-up
On Sensing Probe |
| Approval Ratings: |
NRTL/C
NEMA 4, 5, 7, 9 and 12
Explosion Proof for Class II Group E, F & G |
| Probe Options: |
Delrin, Teflon, Food Grade, Flush, Flexible Extension, Stubby Shielded, Extended Shield, Bare Shielded, and Lagged Probes |
Contact Us |
|
PRO II X Brochure and Product
Manual
 Brochure
0 Manual |
