|
|
The
PRO FL Flushmount capacitance probe features
a noninvasive design that mounts on the exterior
of the vessel. Applicable for a wide range of
solid, liquid, and slurry materials where intrusiveness
is a concern. Available in PRO I, PRO IIX, PRO
X, PRO DC, PRO Remotes, and PRO Auto-Cal model
types.
Features
- No
vessel intrusion with flush mount design
- Pro
Shield protects against material buildup on
probe surface
- Simple,
precise "Quick Set" calibration
- Fail-safe
protection
- Bin
wall adapter available when working with thick
walls or angled hoppers.
|
PRO I-FL
|
Specifications
|
| Power
Requirements: |
120/240
VAC, 12/24 VDC
50/60 Hz ± 15%, 5VA |
| Output
Relay: |
DPDT
10 Amp at 250 VAC |
Ambient
Temperature
Electronics:
Sensor: |
-40°
to +185°F (-40° to +85°C)
+150°F Standard, +450°F High Temp |
| Pressure: |
250
PSI, Flush Mount |
| Sensitivity
Setting: |
Adjustable
Sensitivity to < 1 Picofarad |
| Calibration: |
"Quick
Set" Course/Fine
Single Turn Potentiometers |
| Fail-Safe: |
Switch
Selectable High/Low |
| Time
Delay: |
Adjustable
.25 to 10 seconds |
| Enclosure: |
Cast
Aluminum, Bolt-on Cover
USDA Approved Finish |
| Conduit
Entry: |
¾"
NPT |
| Mounting: |
Flush
Mount, Non-Invasive |
| Pro
Shield: |
Compensates
For Material Build-up
On Sensing Probe |
| Approval
Ratings: |
NRTL/C
NEMA 4X, 5 and 12
NEMA 7 & 9 Available |
| Status
Indicator: |
Visual
LED Indicates Sensor Status:
Uncovered, Covered and Power Failure |
| Probe
Options: |
Flush
Mount Sensor,
Standard and High Temp |
Contact Us
|
|
PRO FL Brochure and Product
Manuals
0 Brochure
PRO I Manual
PRO II X Manual
PRO X Manual
PRO DC Manual
PRO Auto-Cal Manual
PRO Remote Manual
|
