Pro
I 
The
Pro I capacitance sensor features a brightly illuminated
LED status indicator. The top mounted LED allows
you to visually determine the status of the sensor
without removing the cover. The status conditions
are as follows: Blinking LED- sensing Probe is uncovered;
solid LED- normal operation and the sensing probe
is covered; off LED- failure has occured and fail-safe
relay has responded. The Pro I provides reliable
point level detection and process control for solid,
liquid, and slurry materials.
|
|
Pro
X
The
Pro X capacitance sensor is specially designed for
applications in hazardous locations. It's Pro Shield
technology ignores material buildup, guarding against
false indications. The sensor housing is explosion
proof - for Class II approval applications, select
the Pro IIX model. |
|
Pro II
X
The Pro II X is our most versatile all-purpose
probe. It works reliably in bulk solids, powders,
slurries, or liquids. It has a rugged 5/8"
dia. 316 ss probe featuring "pro-shield"
protecting against false readings because of coating
and buildup on probe.
|
|
Pro
Flushmount
The
Pro I-FL Flushmount capacitance probe features a
noninvasive design that mounts on the exterior of
the vessel. Applicable for a wide range of solid,
liquid, and slurry materials where intrusiveness
is a concern. |
|
Pro
IIX 3A
The
Pro II X 3A conforms to the 3A and USDA sanitary
standards for sensors and sensor fittings used for
milk and milk products' equipment. It also conforms
to food grade and pharmaceutical standards. However,
its durable, abrasion resistant probe assembly makes
it suitable for use in a variety of solids, liquids,
and slurries. |
|
Pro
IIIX
The
Pro IIIX capacitance sensor offers reliability and
affordability. Its probe assembly is constructed
of 5/8" stainless steel covered with a Delrin sleeve,
offering increased durability for use in abrasive
environments. This non-shielded probe is ideal for
use in both liquid and solid applications. |
|
Pro
Remote
The
Pro Remote capacitance sensor is specially designed
for high temperature, vibration, or hazardous applications.
This model features remote electronics located in
a separate housing. Depending upon necessary sensitivity,
this allows the sensor's electronics to be safely
mounted up to 75' from the sensing probe and hostile
environment. |
|
Pro
DC
The
Pro DC capacitance sensor offers reliable point
level detection in a low voltage application. Its
Pro Shield technology guards against false readings
from material buildup. This allows the sensor to
be used in vessels storing a wide variety of dusty,
sticky, or clinging materials. |
|
CompactPro
The
CompactPro is a compact capacitance probe
for reliable level measurement and plugged chute
detection in liquid, powder, granular, and pelletized
materials. This probe is designed for tight quarters
where proximity switches don't work. In addition,
its special Pro Shield technology ignores the material
buildup that causes proximity switches to fail. |
|
