Heritage Cooperative's Progressive Approach to Living with Wetlands

OHIO COOP BUILDS A SAFE AND CLEAN TERMINAL IN A SENSITIVE AREA 

Heritage Cooperative
West Mansfield, OH
937-355-0003

Founded: 2009
Storage capacity: 28 million bushels at 37 locations
Annual volume: 55-60 million bushels
Annual revenues: $600 million
Number of members: 3,700
Number of employees: 250
Crops handled: Corn, soft red winter wheat, soybeans
Services: Grain handling and mer-chandising, feed, agronomy, energy

Key personnel:
Eric Parthemore, president/CEO
Travis Rowe, vice president/chief commercial officer
Ed Nienaber, vice president, grain
Terry House, vice president, agronomy
Dave McIntosh, Marysville Ag Campus manager, grain operations
Wes Bahan, grain buyer
Jeff Covault, grain superintendent
Jimmy Dulin, agronomy wopera-tions manager
Sue Redman, director, crop nutrients
Melinda Ledley, director, grain origi-nation, logistics, and risk compliance

Supplier List

Aeration fans/system ..... AIRLANCO
Bearing sensors ..... CMC Industrial Electronics
Bucket elevators ..........InterSystems
Bulk weigh scales ........InterSystems
Bulk weigh scale controls...........CompuWeigh Corp.
Catwalks ............Warrior Mfg. LLC
Cleaner .......................InterSystems
Contractor/millwright ..... Hogenson Construction
Control system ................. Kahler Automation
Conveyors ...................InterSystems
Distributors ................InterSystems
Dust collection system .........AIRLANCO
Elevator buckets ............Tapco Inc.
Engineering ... Sunfield Engineering 
Fall protection ............... Hogenson Construction
Grain dryer ......Zimmerman Grain Dryers
Grain temp system......Safe-Grain Inc.
Level indicators ..... BinMaster Level Controls
Magnets .. Industrial Magnetics, Inc.
Manlift ..................Sidney Mfg. Co.
Motion sensors ..... CMC Industrial Electronics
Roof system ........ Kooiker Roofing & Insulation
Sampler ............... InterSystems
Tower support system ............ Warrior Mfg.  LLC
Truck probe .............. InterSystems
Truck scales.......Brechbuhler Scales Inc.

“Maximum Practical Avoidance.” That’s the term used to describe the design and construction of Heritage Cooperative’s new 1.5-million-bushel, $35 million rail terminal on a 277-acre Ag Campus outside of Marysville, OH (937- 642-3841), much of it consisting of forested wetlands.

“We designed the facility around the wetlands,” says President and CEO Eric Parthemore, who joined Heritage in 2009 from Farmers Commission Co., when that coop consolidated with Champaign Landmark to form Heritage. “Our 12,000 feet of rail track including an 8,800-foot loop track, for example, isn’t really a round loop, because we were avoiding removing any of the wetlands on the site.”

Not only does the site include the grain elevator and loop track, but Heritage also built a 30,000-ton dry fertilizer and 2-million-gallon liquid fertilizer facility on the site, as well as a research farm for the cooperative’s proprietary brand of Shur Grow Seeds.

“Social responsibility is an important part of our corporate philosophy,” Parthemore says. “Our mission is not only to provide ag products and services that add value to farming operations but also to improve the quality of life in our rural communities.”

Not every grain handler would go through that much trouble, but the site had strong attractions. Notably, it was located along a CSX mainline and had easy access to a four-lane highway, as well as city utilities. Parthemore notes that the location is convenient to a lot of prime farmland that was underserved for rail shipping.

Project Construction

Heritage hired Hogenson Construc-tion, West Fargo, ND (701-281-1742), as general contractor and millwright on the new facility. That’s a long way from home, but Campus Manager Dave McIntosh, in his 16th year with the co-operative, says Hogenson has plenty of experience in Ohio. Heritage managers visited recently-completed Hogenson projects for CGB at Defiance and Kalmbach Feeds in Upper Sandusky, before awarding the contract. “We were very impressed with their work,” he says.

In addition to Hogenson, Sunfield Engineering Inc., Cedar, MI (231-360- 8608), performed engineering services on the project, and Kahler Automation Corp., Fairmont, MN (507-235-6648), provided the facility’s automation systems.

Groundbreaking took place in May 2014. The first load of grain was received on Jan. 18, 2016.

Slipform Construction

The terminal elevator includes eight 180,000-bushel slipform concrete tanks standing 45 feet in diameter and 140 feet tall, as well as an enclosed space housing the facility’s 60,000-bph InterSystems bulk weigh loadout scale.

“We went with concrete for its longevity when constantly loading and unloading tanks for rail shipping,” says McIntosh. “The slipform method allowed us to incorporate two 30,000-bushel and two 6,000-bushel interstices for blending. You can’t do that with steel."

He notes, however, that the cooperative plans to add 1.7 million bushels of upright steel storage later in 2016. Elevator Services and Storage Inc., Beaverdam, OH, will serve as the contractor on that project.

The big tanks are outfitted with a five-cable Safe Grain grain temperature monitoring system, while the two larger interstices have one cable each. Tanks also are outfitted with BinMaster level controls.

The big tanks also have AIRLANCO Airauger aeration unloading system with side sumps for both aeration and unload-ing powered by a single AIRLANCO 75-hp centrifugal fan per tank. The fans generate 1/10 cfm per bushel for aeration.

Grain Flow

Trucks delivering grain to the Marysville facility utilize a pair of 72-foot pitless Brechbuhler inbound and outbound truck scales. Truck loads are sampled prior to the inbound scale with an InterSystems truck probe. Heritage does not employ a scale automation system for inbound grain, however.

“As a farmer-owned cooperative, there’s a lot to be said for direct facetime with our customers,” McIntosh says. “We like for them to interact with our employees, and that’s worth the extra time and expense of manually entering gross and tare weights. We also employ a full-time person at our truck dump, whenever we’re open for business, for that same reason.”

Trucks proceed to one of two enclosed 1,100-bushel mechanical receiving pits. The pits are serviced by an AIRLANCO baghouse dust filter system, again part of the cooperative’s commitment to environmental responsibility. The pits feed a pair of 18,000-bph InterSystems legs equipped with Tapco 20x8 CC-HD buck-ets mounted on 21.5-inch LEGG belts.

The legs deposit grain into a 14-duct InterSystems swing-type double distributor. This, in turn, sends grain via a pair of 18,000-bph InterSystems overhead drag conveyors to a pair of 5-duct InterSystems rotary distributors and into storage via gravity spouts.

Grain also can be sent to a 5,000-bph, natural gas-fired Zimmerman tower dryer, which in turn, deposits dry grain into a 10,000-bph InterSystems dry leg back to storage. McIntosh says the dryer has not been used yet, so he can’t comment on its performance.

The storage tanks empty onto 40,000-bph, below-ground InterSystems enclosed belt conveyors running to a 40,000-bph InterSystems shipping leg. This utilizes three rows of Tapco 16x8 CC-HD buckets mounted on a 51-inch LEGG belt.

One of the two receiving legs also can be used for loadout bringing the total volume close to matching the capacity of the 60,000-bph InterSystems bulk weigh loadout scale. The scale is out-fitted with CompuWeigh GMS 4000 scale control saystem. The operator has the option of running grain through a 40,000-bph InterSystems gravity screener prior to loadout.

Workers atop railcars during train loading are protected by a trolley-type fall protection unit fabricated and installed by Hogenson.

The rail loading station also includes a 10,000-bph reclaim system for offloading off-grade grain from railcars.

According to McIntosh, it takes approximately seven to eight hours to load 90-car unit trains on the CSX.

Ed Zdrojewski, editor