| |
Rotary Level Indicators |
|
|
The BMRX rotary paddle is BinMaster’s most popular rotary level indicator, featuring a basic reliable and rugged design that provides for simple, dependable operation. The BMRX rotary is a proven technology used to prevent bin overflows and is used as a high or low level control for a wide variety of bulk solid materials including granulars, pellets or powders – providing alerts when a bin reaches a full or empty condition. |
|
| |
|
|
The Maxima+ is BinMaster’s most advanced rotary level indicator. Microprocessor-based, it offers genuine fail-safe protection. The distinguishing feature is its ability to continuously self-diagnose, and in the event of a failure – whether power, the motor or electronics – provide an immediate alert via a red LED indicator on the top of the unit. The MAXIMA+ is the rotary of choice when continuous operation of the unit is crucial. |
| |
|
|
Vertical Rotary Extension
for High Level Detection |
|
Top-of-bin mounting for rotaries is ideal when the rotary is used as a high level alarm. Solid material will tend to be higher at the filling point and most operators don’t want any bin filled to the very top and need to allow for a specified amount of headroom in the bin. For top-of-bin applications, BinMaster manufactures to the length requested by the customer, offering custom lengths up to 144”.
|
| |
|
|
Horizontal Rotary Extension
for Thick Bin Walls |
|
The horizontal rotary extension provides the ability to install a rotary on the side of a bin wall,
such as those in concrete silos, up to 12” thick. This extension design allows for rotaries to be side-mounted with minimal risk of damage during operations. This optional assembly includes an extended drive shaft with a protective shaft guard that keeps the shaft centered and BinMaster’s “no packing” seal at the end of the shaft. Standard lengths of 6”, 8”, 10”, or 12” are available forboth the MAXIMA+ or BMRX rotaries.
|
| |
|
|
Stainless Steel Process Connection
for Corrosive Materials |
|
BinMaster’s optional stainless steel process connection was designed for corrosive
applications and can be used in conjunction with either the BMRX or MAXIMA+ rotary.
The 304 SS solid stainless steel fitting is available in both 1-1/4” and 1-1/2” NPT
sizes and comes with a stainless steel seal/bearing carrier. Rotaries equipped with
this connection are configured so all materials that come into contact with the bin are
stainless steel, making it ideal for applications such as food processing or in caustic
materials.
|
| |
|
|
Heat Tubes
for High Temperature Applications |
|
When the external temperature outside the bin exceeds 140°F (60°C), an optional heat tube can be added to distance the electronics of the unit away from a heat source. They can also be used to extend the rotary beyond insulation on the outside of the bin. Heat tubes can be used for top or side mounted applications with either the BMRX or MAXIMA+. They are available in 8” or 12” lengths in either aluminum or stainless steel.
|
| |
|
|
The Mini-Rotary is an economical, compact rotary level control that has been designed for use in small bins and hoppers. Its small size allows the Mini-Rotary to be installed in space constrained bins that still need reliable level control. It is simple to install and use in a variety of materials including plastics, feed, seed, chemicals and other powder or bulk materials.
|
| |
|
 |
| Point Level Alarm Panel |
More |
The Point Level Alarm Panel is designed to monitor bin levels and automatically alarm when levels change – such as reaching a high or low status. The alarm panel is available with four to 24 level indicator stations making it convenient to read status from multiple bins from a single panel. It can be connected to an external horn or common alarm to provide an alert status throughout a facility. |
| |
|
